DM800 HD se Flashing firmware by Browser

Flashing a new firmware by Browser

What you need to flash

You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
images like *.img files. Don't try it - it won't work.

You need either a DHCP server and a configured bootloader

You need a browser and a network cable. Connect your Dreambox to a switch/hub/router in your lokal LAN.

To flash a new image, you can use the second stage loader. It must be present and not broken.

The following steps assume you have a DHCP server.

- Power down the Dreambox, either using "shutdown" and by switching off by the power switch.
  Standby is not enough! 

    - (1.) Press and hold the power button.
    - (2.) Switch on your Dreambox.
    - (3.) Your Dreambox will get the next free DHCP IP address from your router.

    - Now, open a browser on your PC.
      (1.) enter in the address line "http://ip/" .
    - (2.) on the bottom of the page, there's a link called "firmware upgrade". Click it.

    - On the next page, you can select the flash image you want to flash. be sure that it has the ".nfi" extension.
       You can't flash other images (like .img)!
    - Click on "FLASH!" and wait. It might take some time to upload and flash the image.
    - Switch the box off again, and on again. The new image should be flashed and working.